Session Schedule

Session Schedule2019-01-07T06:25:51-05:00

Tuesday

8:30 AM

A Kid's Introduction to 3D Modeling (Tues)

Presented by: Brian Carnes
Time: Tuesday 8:30 AM - 12:05 PM

This session is targeted for children. All ages of children are welcome (with a responsible adult). We will tour the maker lab and talk about the exciting world of 3D printing. We will look at the printers as well as models made on them and pass around lots of things. We will also go over basics of...

Room: Guava/TamarindTrack: KidzMashTags: Design (UI/UX/CSS), HardwareFormat: Maker SpaceLevel: Introductory and overview
10:30 AM

Maker Museum and Open Lab (Tues)

Presented by: Greg Huber
Time: Tuesday 10:30 AM - 5:05 PM

Come visit the Maker Museum and Open Lab, in the Mangrove room. You will be able to: Learn to solder Learn to tinker on hardware and develop software to run sketches using Circuit Python Check out different projects Hang out and meet with other Makers and see what they are building or working...

Room: MangroveTrack: CodeMashFormat: Maker Space
1:00 PM

From idea to physical series: A basic overview of the world of CAD and 3D Printing (Tues)

Presented by: Brian Carnes
Time: Tuesday 1:00 PM - 2:00 PM

This session will talk about the exciting world of 3D printing with a bit of the history of the technology. We will look at the lab’s printers as well as models made on them. We’ll then cover choosing a CAD app and will briefly cover using curated 3D printer object libraries and different CAD...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
1:30 PM

Intro to Bluefruit Circuit Python (Tues)

Presented by: Greg Huber
Time: Tuesday 1:30 PM - 2:30 PM

Want to learn how to make blinky light or beepy noise things? Or.. Possibly something a little more ambitious? Learn how to code the Adafruit Bluefruit Circuit Playground in the Maker Space. Purchase the Bluefruit project kit on Eventbrite where you bought your CodeMash ticket (limited...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
2:00 PM

From idea to physical: A demo of how to make CAD models in Rhino3d. (Tues)

Presented by: Brian Carnes
Time: Tuesday 2:00 PM - 4:00 PM

This lab is intended to be a fast-paced technology walk-through of the process of creating a 3D printed object. We will focus in on the process of using CAD to create our model with a NURBS modeler called Rhino3D and will walk through the UI and how Rhino uses basic curves and shapes to create more...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
3:00 PM

Learn to Solder (Tues)

Presented by: Jameson Hampton
Time: Tuesday 3:00 PM - 4:00 PM

Attend this session to learn how to solder electronic components by assembling a simple LED badge. *** A paid ticket is required for this session. It can be purchased on Event Brite where you bought your CodeMash ticket. Even if you’re a total beginner, don’t be intimidated: anyone can learn...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
4:00 PM

From idea to physical series: Additional Castle project walk-through Rhino project. (Tues)

Presented by: Brian Carnes
Time: Tuesday 4:00 PM - 5:00 PM

Can’t get enough model building? Want to make something more advanced than your basic cups/keychains/challenge coins? We’ve noticed we have some repeat students each year on our kids track that just love to build models, and we’ve also run several years of our introductory track for adults. We...

Room: Guava/TamarindTrack: CodeMashFormat: Maker Space

Wednesday

8:30 AM

A Kid's Introduction to 3D Modeling (Weds)

Presented by: Brian Carnes
Time: Wednesday 8:30 AM - 11:55 AM

This session is targeted for children. All ages of children are welcome (with a responsible adult). We will tour the maker lab and talk about the exciting world of 3D printing. We will look at the printers as well as models made on them and pass around lots of things. We will also go over basics of...

Room: Guava/TamarindTrack: KidzMashFormat: Maker SpaceLevel: Introductory and overview
9:00 AM

Maker Museum and Open Lab (Weds)

Presented by: Greg Huber
Time: Wednesday 9:00 AM - 5:00 PM

Come visit the Maker Museum and Open Lab, in the Mangrove room. You will be able to: Learn to solder Learn to tinker on hardware and develop software to run sketches using Circuit Python Check out different projects Hang out and meet with other Makers and see what they are building or working...

Room: MangroveTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
10:00 AM

Intro to Bluefruit Circuit Python (Weds)

Presented by: Greg Huber
Time: Wednesday 10:00 AM - 11:00 AM

Want to learn how to make blinky light or beepy noise things? Or.. Possibly something a little more ambitious? Learn how to code the Adafruit Bluefruit Circuit Playground in the Maker Space. Purchase the Bluefruit project kit on Eventbrite where you bought your CodeMash ticket (limited...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
1:00 PM

From idea to physical series: A basic overview of the world of CAD and 3D Printing (Weds)

Presented by: Brian Carnes
Time: Wednesday 1:00 PM - 2:00 PM

This session will talk about the exciting world of 3D printing with a bit of the history of the technology. We will look at the lab’s printers as well as models made on them. We’ll then cover choosing a CAD app and will briefly cover using curated 3D printer object libraries and different CAD...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
1:30 PM

Learn to Solder (Weds)

Presented by: Jameson Hampton
Time: Wednesday 1:30 PM - 2:30 PM

Attend this session to learn how to solder electronic components by assembling a simple LED badge. *** A paid ticket is required for this session. It can be purchased on Event Brite where you bought your CodeMash ticket. Even if you’re a total beginner, don’t be intimidated: anyone can learn to...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
2:00 PM

From idea to physical: A demo of how to make CAD models in Rhino3d. (Weds)

Presented by: Brian Carnes
Time: Wednesday 2:00 PM - 4:00 PM

This lab is intended to be a fast-paced technology walk-through of the process of creating a 3D printed object. We will focus in on the process of using CAD to create our model with a NURBS modeler called Rhino3D and will walk through the UI and how Rhino uses basic curves and shapes to create more...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
4:00 PM

From idea to physical series: Additional Castle project walk-through Rhino project. (Weds)

Presented by: Brian Carnes
Time: Wednesday 4:00 PM - 5:00 PM

Can’t get enough model building? Want to make something more advanced than your basic cups/keychains/challenge coins? We’ve noticed we have some repeat students each year on our kids track that just love to build models, and we’ve also run several years of our introductory track for adults. We...

Room: Guava/TamarindTrack: CodeMashFormat: Maker Space
5:00 PM

How would you print that? (Panel) (Weds)

Presented by: Brian Carnes
Time: Wednesday 5:00 PM - 6:00 PM

We have a wealth of different perspectives reflected with our 3D printing room staff- including tinkering hobbyists, hardcore makers, and even that of using multiple printer types repeatably in a small business setting. We thought it would be fun to share these various perspectives on how we...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview

Thursday

8:30 AM

A Kid's Introduction to 3D Modeling (Thurs)

Presented by: Brian Carnes
Time: Thursday 8:30 AM - 12:00 PM

This session is targeted for children. All ages of children are welcome (with a responsible adult). We will tour the maker lab and talk about the exciting world of 3D printing. We will look at the printers as well as models made on them and pass around lots of things. We will also go over basics of...

Room: Guava/TamarindTrack: KidzMashFormat: Maker Space
9:00 AM

Maker Museum and Open Lab (Thurs)

Presented by: Greg Huber
Time: Thursday 9:00 AM - 5:00 PM

Come visit the Maker Museum and Open Lab, in the Mangrove room. You will be able to: Learn to solder Learn to tinker on hardware and develop software to run sketches using Circuit Python Check out different projects Hang out and meet with other Makers and see what they are building or working...

Room: MangroveTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
10:00 AM

Intro to Bluefruit Circuit Python (Thurs)

Presented by: Greg Huber
Time: Thursday 10:00 AM - 11:00 AM

Want to learn how to make blinky light or beepy noise things? Or.. Possibly something a little more ambitious? Learn how to code the Adafruit Bluefruit Circuit Playground in the Maker Space. Purchase the Bluefruit project kit on Eventbrite where you bought your CodeMash ticket (limited...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
1:00 PM

From idea to physical series: A basic overview of the world of CAD and 3D Printing (Thurs)

Presented by: Brian Carnes
Time: Thursday 1:00 PM - 2:00 PM

This session will talk about the exciting world of 3D printing with a bit of the history of the technology. We will look at the lab’s printers as well as models made on them. We’ll then cover choosing a CAD app and will briefly cover using curated 3D printer object libraries and different CAD...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
1:30 PM

Learn to Solder (Thurs)

Presented by: Jameson Hampton
Time: Thursday 1:30 PM - 2:30 PM

Attend this session to learn how to solder electronic components by assembling a simple LED badge. *** A paid ticket is required for this session. It can be purchased on Event Brite where you bought your CodeMash ticket. Even if you’re a total beginner, don’t be intimidated: anyone can learn to...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
2:00 PM

From idea to physical: A demo of how to make CAD models in Rhino3d. (Thurs)

Presented by: Brian Carnes
Time: Thursday 2:00 PM - 4:00 PM

This lab is intended to be a fast-paced technology walk-through of the process of creating a 3D printed object. We will focus in on the process of using CAD to create our model with a NURBS modeler called Rhino3D and will walk through the UI and how Rhino uses basic curves and shapes to create more...

Room: Guava/TamarindTrack: CodeMashFormat: Maker Space
4:00 PM

From idea to physical series: Additional Castle project walk-through Rhino project. (Thurs)

Presented by: Brian Carnes
Time: Thursday 4:00 PM - 5:00 PM

Can’t get enough model building? Want to make something more advanced than your basic cups/keychains/challenge coins? We’ve noticed we have some repeat students each year on our kids track that just love to build models, and we’ve also run several years of our introductory track for adults. We...

Room: Guava/TamarindTrack: CodeMashFormat: Maker Space
5:00 PM

How would you print that? (Thurs)

Presented by: Brian Carnes
Time: Thursday 5:00 PM - 6:00 PM

We have a wealth of different perspectives reflected with our 3D printing room staff- including tinkering hobbyists, hardcore makers, and even that of using multiple printer types repeatably in a small business setting. We thought it would be fun to share these various perspectives on how we...

Room: Guava/TamarindTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview

Friday

8:30 AM

A Kid's Introduction to 3D Modeling (Fri)

Presented by: Brian Carnes
Time: Friday 8:30 AM - 12:00 PM

This session is targeted for children. All ages of children are welcome (with a responsible adult). We will tour the maker lab and talk about the exciting world of 3D printing. We will look at the printers as well as models made on them and pass around lots of things. We will also go over basics of...

Room: Guava/TamarindTrack: KidzMashFormat: Maker Space
9:00 AM

Maker Museum and Open Lab (Fri)

Presented by: Greg Huber
Time: Friday 9:00 AM - 3:00 PM

Come visit the Maker Museum and Open Lab, in the Mangrove room. You will be able to: Learn to solder Learn to tinker on hardware and develop software to run sketches using Circuit Python Check out different projects Hang out and meet with other Makers and see what they are building or working...

Room: MangroveTrack: CodeMashFormat: Maker SpaceLevel: Introductory and overview
10:00 AM

Intro to Bluefruit Circuit Python (Fri)

Presented by: Greg Huber
Time: Friday 10:00 AM - 11:00 AM

Want to learn how to make blinky light or beepy noise things? Or.. Possibly something a little more ambitious? Learn how to code the Adafruit Bluefruit Circuit Playground in the Maker Space. Purchase the Bluefruit project kit on Eventbrite where you bought your CodeMash ticket (limited...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview
1:30 PM

Learn to Solder (Fri)

Presented by: Jameson Hampton
Time: Friday 1:30 PM - 2:30 PM

Attend this session to learn how to solder electronic components by assembling a simple LED badge. *** A paid ticket is required for this session. It can be purchased on Event Brite where you bought your CodeMash ticket. Even if you’re a total beginner, don’t be intimidated: anyone can learn to...

Room: MangroveTrack: HardwareFormat: Maker SpaceLevel: Introductory and overview